Die Casting
Zamak 3 Die Casting & Products
Trident Components offers ZAMAK 3 die casting for manufacturing ZAMAK 3 products. Our ZAMAK 3 products, productions capabilities, and warehousing facilities will give you quality parts at competitive prices. ZAMAK 3 is the most popular of the ZAMAK series of alloys for zinc die casting due to its castability and dimensional stability.
ZAMAK 3 Properties:
|
Ultimate Tensile Strength: psi x 103 (MPa) |
41 (283) |
|---|---|
|
Yield Strength - 0.2% Offset: psi x 103 (MPa) |
32 (221) |
|
Elongation: % in 2" |
10 |
|
Shear Strength: psi x 103 (MPa) |
31 (214) |
|
Hardness: Brinell |
82 |
|
Impact Strength: ft-lb (J) |
432 (58) |
|
Fatigue Strength Rotary Bend - 5x108 cycles: psi x 103 (MPa) |
6.9 (48) |
|
Compressive Yield Strength 0.1% Offset: psi x 103 (MPa) |
604 (414) |
|
Modulus of Elasticity - psi x 106 (MPa x 103) |
12.46 (85.5) |
|
Poisson's Ratio |
0.27 |
|
Density: lb/cu in (g/cm3) |
.24 (6.6) |
|
Melting Range: °F (°C) |
718-728 (381-387) |
|
Electrical Conductivity: %IACS |
27 |
|
Thermal Conductivity: BTU/ft/hr/°F (W/m/hr/°C) |
65.3 (113.0 |
|
Coefficient of Thermal Expansion: 68-212°F µin/in/°F (100-200°C µm/mm/°C) |
15.2 (27.4) |
|
Specific Heat: BTU/lb/°F (J/kg/°C) |
.10 (419) |
|
Pattern of Die Shrinkage: in/in |
.007 |
Contact one of our sales representatives today
to inquire about a quote from Trident Components
or call us today at 888-312-0745. Typical volumes start at 2500 pieces, average orders are usually 10,000 - 20,000 pieces.
